Limelite Brick & Stone Protector
Clear wall sealer for brick, stone and render
Transparent, breathable, water repellent wall treatment that protects walls and improves thermal efficiency. This non-drip, brush or roller applied wall treatment dries to a transparent, colourless finish and prevents damp, mould and dirt on masonry to provide long lasting protection.
Stopping damp on solid brick walls
This water repellent sealer protects solid brick walls from damp and mould while retaining breathability to allow any moisture within the wall to escape.
Protecting limestone walls from damp and dirt
Preventing frost damage on limestone walls has never been easier. Limelite Brick and Stone Protector waterproofs porous stone walls like limestone to prevent frost damage, reduce the growth of mould and algae and prevent dirt and pollution from causing discolouration.
Preserving sandstone walls
Applying a waterproof masonry seal to porous walls like sandstone helps prevent erosion and damage to the surface and preserve the natural colour.
Stopping damp and mould growth in older homes
By waterproofing brick and stone walls and reducing the amount of water absorbed by brickwork by up to 98%, Limelite Brick and Stone Protector can reduce damp and mould growth in older buildings with solid brick or stone walls. It also retains breathability, allowing walls to dry naturally.
Improving the thermal efficiency of solid brick and stone walls
By preventing water penetration, Limelite Brick and Stone Protector improves the thermal efficiency and insulating properties of the wall. Since dry walls are better insulators than wet walls, this helps to maximise the wall’s thermal resistance or "R" value. This helps to retain heat and reduce heating bills, particularly in older buildings with solid brick or stone walls.
Limelite Brick and Stone Protector is ideal for use on brick, block, stone and concrete substrates. Limelite With proper application it leads to a low water uptake, high penetration depth and a good beading effect. The natural appearance of the treated surface remains unchanged.
• Safeguards historic structures from deterioration
• Reduces water absorption by up to 95%
• Greatly improves the insulation properties of the wall
• Extremely high penetration
• Prevents mould growth
• Maintains the natural appearance of the wall
• Increases the freeze-thaw resistance of the substrate.
• Single coat application
• Ready to use
Water repellent wall treatment for improved heat retention
What is Limelite Brick and Stone Protector?
Limelite Brick and Stone Protector is a breathable, water repellent wall treatment that protects walls and improves thermal efficiency.
Why use Limelite Brick and Stone Protector?
- Waterproofs masonry, reducing the amount of water absorbed by brickwork by up to 98%
- Protects brick walls, stone walls and block walls from damage by water and frost
- Reduces the growth of mould and algae
- Transparent, colourless finish that retains the original look of the wall
- Retains breathability, allowing walls to dry naturally
- Improves thermal efficiency and insulating properties of the wall. This helps to retain heat and reduce heating bills
Limelite Brick and Stone Protector is easy to use:
- None-drip formula - easy to apply using a brush or roller
- Fast, one coat application
- Visible during application to show area covered
- Colourless finish with no texture or colour change
- Full instructions provided
- Advice and support available by calling Tarmac’s Specialist Products team
Where can you use Limelite Brick and Stone Protector?
Limelite Brick and Stone Protector protects porous surfaces such as brick, sandstone, limestone, render and concrete block.
How does Limelite Brick and Stone Protector help to keep buildings warmer?
Limelite Brick and Stone Protector keeps walls dry throughout the year. Since dry walls are better insulators than wet walls, this helps to maximise the wall’s thermal resistance or "R" value.
Limelite Brick and Stone Protector is best applied undiluted by brush or roller. Brushes, lambskin rollers or spatulas may be used to smaller areas. Larger areas can be spray applied.
One litre of Limelite Brick and Stone Protector will cover approximately 5m2.
Our 10L tub will cover approximately 50m2.
Our 20L tub will cover approximately 100m2.
Packaging and Storage
Limelite Brick and Stone Protector is available in 10 and 20 litre containers, palletised and shrink wrapped.
Palletised Limelite Brick and Stone Protector should be stored in cool dry areas clear of the ground, sheeted or under cover and stacked not more than two pallets high.
The product should be used on a first in – first out basis. The product “best before end” date is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
Appearance: White or yellowish cream Active Substance:: 25 wt% Odour: Odourless Density: 0,848g/cm3 Flash Point: 65°C
|Typical Penetration Depth (mm)|
Figures are approximate and do not account for site wastage
Take up mechanically and dispose of in accordance with the Local Authority. Do not flush away with water. For small amounts absorb with a neutral liquid binding material and dispose of according to local authority regulations. For larger amounts liquid may be recovered using suction devices or pumps. Silicone fluids are slippery, on areas where spillages have been cleaned apply sand or other inert granular material to improve traction.
All Tarmac products are factory produced, tested and packaged to quality control procedures in accordance with BS EN ISO 9001.
Health and Safety
Health and safety advice, which must be followed, can be found on the Material Safety Data Sheet. Users are advised to wear goggles, gloves and overalls when handling, mixing and applying Limelite Brick and Stone Protector. In case of mist, spray or aerosol exposure wear suitable personal respiratory protection and a protective suit.